HEATER OIL RO405 350W 230V
Supply voltage: 230 VAC (± 10%) 50÷60 Hz
Insulation voltage: 250V
Dielectric strength between terminals and case: 2000 VAC × 1 minute
Power consumption: 350 W
Service: continuous
Operating thermostat: not adjustable
Turns off heating: 72°C ± 10%
Turns on heating: 57°C ± 10%
Corrugated sheath: LD-PEwith single-core silicone insulated cables 1mm2
Degree of protection: IP 54
Supportable temperature limits: -20 to +120°C
Weight: 1,5 Kg
- Phase
- Single phase
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 230
- Protection degree
- IP54
- Length (mm)
- 197
- Width (mm)
- 118
- Height (mm)
- 41
- Power consumption (W)
- 350
- Product type
- Scaldiglia
- Weight (Kg)
- 1.5
Heater Oil RO-405 350W
The heater oil RO405 350W is a device used to heat the oil inside the engine circuit of generator sets.
The heater oil RO405 350W can ensure that the oil temperature drops below a certain value set by built-in thermostat.
The heater oil RO405 350W is of the electric type and uses electricity to produce heat. It is equipped with an electric heating element, which heats the oil circulating inside the engine circuit. The heater is controlled by a thermostat, which adjusts the oil temperature according to the needs of the engine.
The heater oil RO405 350W is compatible with various makes and models of generator sets, and is designed for easy installation and long service life. With its sturdy stainless steel construction and high energy efficiency, The heater oil RO405 350W is an excellent solution for keeping the engine of gensets running efficiently at all times.
DISTINCTIVE FUNCTIONS
- Internal thermostat temperature maintenance.
- Suitable for mounting directly on the engine.
- Connections facilitated by the presence of a cable.
- Excellent dielectric strength (2000V).
TECHNICAL CHARACTERISTICS heater oil RO405 350W
Supply voltage: 230 VAC (± 10%) 50÷60 Hz
Insulation voltage: 250V
Dielectric strength between terminals and case: 2000 VAC × 1 minute
Power consumption: 350 W
Service: continuous
Operating thermostat: not adjustable
Turns off heating: 72°C ± 10%
Turns on heating: 57°C ± 10%
Corrugated sheath: LD-PEwith single-core silicone insulated cables 1mm2
Degree of protection: IP 54
Supportable temperature limits: -20 to +120°C
Weight: 1.5kg
Direct Mounting on Engine: The design of The heater RO405 350W allows easy direct mounting on the genset engine, simplifying the installation process.
Facilitated Connections: The presence of a cable facilitates connections, making installation more convenient and efficient.
Sturdy stainless steel construction: the sturdy stainless steel construction gives The heater oil RO405 350W strength and durability, helping to keep the genset engine running efficiently under various operating conditions.
The heater is a good solution to keep the engine intact. The heater is of excellent quality providing great precision.
The RO405 350W heater made of stainless steel has great longevity.
Looking for RO405 350W oil heater with different technical features? HERE you can find our area dedicated to all power generator accessories.
Images and technical data are not binding and may be subject to revision by the manufacturer.
- Phase
- Single phase
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 230
- Protection degree
- IP54
- Length (mm)
- 197
- Width (mm)
- 118
- Height (mm)
- 41
- Power consumption (W)
- 350
- Product type
- Scaldiglia
- Weight (Kg)
- 1.5