MARELLIMOTORI ALTERNATOR 135KVA MXB-E 225 MB4
ALTERNATOR 120KVA MXB-E 225 MA4
Phase type: Threephase
Maximum power 50Hz: 120.0 KVA
Maximum power 50Hz: 96.0 KW
Maximum power 60Hz: 150.0 KVA
Maximum power 60Hz: 120. 0 KW
Frequency: 50 - 60Hz
Voltage: 400V / 480V
Protection degree: IP23
A alternator speed: 1500 / 1800 rpm
Number of poles: 4
Yield: 90.5%
Weight: 377.0Kg
Constant speed
AVR
- Phase
- Single phase / Three phase
- Maximum power three phase (KW)
- 108
- Maximum power three phase (KVA)
- 135
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 400
- Engine rpm (rpm)
- 1500
- Poles
- 4
- Efficiency (%)
- 91.6
- Protection degree
- IP23
- Brushes
- No
- Type of alternator
- Constant Speed
- Voltage regulator
- AVR
- Weight (Kg)
- 407
MARELLIMOTORI MXB-E 225MB4 ALTERNATOR 135KVA THREEPHASE AVR
MARELLIMOTORI MXB-E 225MB4 is a Alternator with a power of 135KVA 108KW, this unit has a self-exciting and selfregulating Brushless operation.
The MXB-E 225MB4 is designed to operate at frequency 50 or 60 HZ, the possibility to work on these two frequencies makes it possible to apply it for any service voltage increasing its versatility, for correct operation. For correct operation it is only necessary to check that the settings are correct for the intended use.
MarelliMotori is supplied with 12 terminals (7 terminals), with which it is normally possible to connect both series and parallel star alternator. According to the needs, it is possible to switch from one connection to another, bearing in mind that the connection of the AVR must necessarily be checked.
MXB-E 225MB4 threephase can be used as singlephase as required. MarelliMotori MXB-E 225MB4 is equipped with AVR type M00FA122A - MARK VX, suitable for synchronous generators of MARELLIMOTORI construction. The regulator is suitable for operation on both three-phase generators and single-phase generators, allowing a fast, precise and reliable setup.
The M00FA122A is an electronic board designed by MarelliMotori, it is protected by a polyurethane resin that protects the device from humidity, dust, aggressive environments. In addition, the AVR is equipped with an internal fuse protection system (5 A, 500 V), which in case of failures or overloads, intervenes and protects the unit in order to make the system safer to place. The M00FA122A serves to make the current stable so as not to ruin the equipment that connects us, especially electronic equipment such as computers or smartphones.
All synchronous machines like a MXB-E 225MB4 for the correct supply of voltage need an electronic control system, known as "voltage regulator" or "AVR" (acronym of Automatic Voltage Regulator) it ensures the proper operation of the machine and especially the underlying power grid.
The regulator M00FA122A is an electronic device that converts alternating current with variable frequency and voltage over time into direct current at constant voltage and thus avoids current surges.
The AVR designed by MarelliMotori is internally equipped with a radio noise filter, which allows to contain radio noise emitted by MarelliMotori generators within the limits set by the European regulations for industrial environments
Each engine has a type of connection to be connected to the alternator so you must pay attention to this aspect; a model can also have 15 to 20 different forms of construction!
We always recommend to check with the help of the technical data sheets the construction form of the desired alternator.
Select the alternator that reflects the technical specifications you require, visit our dedicated section to understand how.
TECHNICAL FEATURES OF THE MXB-E 225MB4
Phase type: Three phase
Maximum power 50Hz: 135KVA
Maximum power 50Hz: 108KW
Maximum power 60Hz: 163 KVA
Maximum power 60Hz: 135KW
Frequency: 50 - 60Hz
Voltage: 400V / 480V
Protection degree: IP23
speed: 1500 / 1800 rpm
Number of poles: 4
Yield: 91.6%
Weight: 407.0Kg
Constant speed
AVR
Are you looking for a product with different characteristics? HERE you can find the entire range MARELLIMOTORI and other specialized brands.
Images and technical data not binding and subject to change by the manufacturer
ANTI-CONDENSATION HEATERS 220V MXB-E 225
SPECIAL VOLTAGE INCLUDED 380V, R3, R6 (LV only) MXB-E 225
N. 3 PT100 RESISTANCE TEMPERATURE DETECTORS IN STATOR WINDINGS MXB-E 225
SEPARATE AUXILIARY TERMINAL BOX MXB-E 225
PROVISION FOR PARALLEL OPERATION WITH SIMILAR GENERATORS WITH AVR (MEC-20) MXB-E 225
PT100 DUPLEX TYPE ON D-END BEARING DOUBLE CONFIGURATION MXB-E 225
PT100 ON N-END BEARING MXB-E 225 FOR DOUBLE BEARING CONFIGURATION
SINGLE-PHASE SENSING AVR MARK VX SIDE MOUNTED MXB-E 225
THREE-PHASE SENSING AVR MEC-20 SIDE MOUNTED MXB-E 225
PMG WITH SINGLE-PHASE SENSING AVR MARK XX SIDE MOUNTED MXB-E 225
PMG WITH SINGLE-PHASE SENSING AVR MARK XX FRONT MOUNTED MXB-E 225
PMG WITH THREE-PHASE SENSING AVR MEC-20 SIDE MOUNTED MXB-E 225
INLET AND OUTLET FILTER IP43 MXB-E 225
INLET AND OUTLET FILTER IP44 MXB-E 225
- Phase
- Single phase / Three phase
- Maximum power three phase (KW)
- 108
- Maximum power three phase (KVA)
- 135
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 400
- Engine rpm (rpm)
- 1500
- Poles
- 4
- Efficiency (%)
- 91.6
- Protection degree
- IP23
- Brushes
- No
- Type of alternator
- Constant Speed
- Voltage regulator
- AVR
- Weight (Kg)
- 407