- New
MECC ALTE ECO40-1L/4 C TYPE THREE PHASE ALTERNATOR 550 KVA AVR
Type of phase: Single-phase / Three-phase
Maximum three-phase power: 601 KVA / 481 KW
Continuous three-phase power: 550 KVA / 440 KW
Maximum single-phase power: 315 KVA / 315 KW
Continuous single-phase power: 292 KVA / 292 KW
Frequency: 50/60 Hz
Voltage: 230 V / 400 V
Degree of protection: IP23
Revolutions of the 'alternator: 1500/1800 rpm
Number of poles: 4
Efficiency: 95%
Constant speed alternator
Brushless
Voltage regulator: AVR
Weight: 1321
- Phase
- Single phase / Three phase
- Maximum power single phase (KW)
- 315
- Continuous power single phase (KW)
- 292
- Maximum power single phase (KVA)
- 315
- Continuous power single phase (KVA)
- 292
- Maximum power three phase (KW)
- 481
- Continuous power three phase (KW)
- 440
- Maximum power three phase (KVA)
- 601
- Continuous power three phase (KVA)
- 550
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 230 / 400
- Engine rpm (rpm)
- 1500 / 1800
- Poles
- 4
- Single-phase power (KVA)
- 315
- Three-phase power (KVA)
- 601
- Efficiency (%)
- 95
- Protection degree
- IP23
- Acoustic pressure
- 82 dB(A) at 7 m
- Brushes
- No
- PMG
- Optional
- Type of alternator
- Constant Speed
- Voltage regulator
- AVR
- Weight (Kg)
- 1305
MECC ALTE ECO40-1L/4 C-TYPE THREE-PHASE ALTERNATOR 550 KVA AVR
The alternator MECC ALTE ECO40-1L/4 C-TYPE three-phase with a power of 550KVA, this unit has a self-exciting and self-regulating Brushless operation equipped with AVR voltage regulator.
The ECO40-1L/4 C-TYPE alternator is designed for operation at frequency 50 or 60 HZ, the possibility of working on these two frequencies makes it possible to apply it to any service voltage, increasing its versatility, for correct operation. For correct operation it is only necessary to verify that the settings are correct for the intended use.
MECC ALTE ECO40-1L/4 C-TYPE is supplied with 12 terminals (7 terminals), with which it is normally possible to connect both the series star alternator and the parallel star alternator. According to your needs, you can switch from one connection to another, bearing in mind that you must necessarily check the connection of the DSR.
The ECO40-1L/4 C-TYPE alternator is complete with self-regulation which is obtained by means of a digital electronic regulator powered by an auxiliary winding. The MECC ALTE ECO40-1L/4 C-TYPE alternator is robust and suitable to meet the demands of the industry and the most demanding technological specifications required in various applications. They are available as bearings in single-bearing or double-bearing configuration.
For the correct supply of voltage, the MECC ALTE ECO40-1L/4 alternator needs an electronic control system, known precisely as "voltage regulator" or "AVR". It guarantees the proper functioning of the machine and above all of the electrical network underlying it.
The AVR is an electronic device that converts alternating current with frequency and voltage varying over time into direct current and thus allows you to avoid sudden changes in current.
TECHNICAL FEATURES MECC ALTE ECO40-1L / 4 C-TYPE
Type of phase: Single / Three-phase
Maximum threephase power: 601 KVA / 481 KW
Continuous threephase power: 550 KVA / 440 KW
Maximum singlephase power: 315 KVA / 315 KW
Continuous singlephase power: 292 KVA / 292 KW
Frequency: 50/60 Hz
Voltage: 230 V / 400 V
Degree of protection: IP23
Revolutions of the 'alternator: 1500/1800 rpm
Number of poles: 4
Efficiency: 95%
Constant speed alternator
Brushless
Voltage regulator: AVR
Weight: 1321
Are you looking for a product with different characteristics? HERE you can find the entire range MECC ALTE and other specialized brands.
Images and technical data are not binding and subject to changes by the manufacturer
MECC ALTE VOLTAGE CONTROL POTENTIOMETER FOR ECO40 ALTERNATORS
MECC ALTE DIODE RBD-1 FAILURE SENSOR FOR ECO40 ALTERNATORS
MECC ALTE COUPLING BELL FOR TYPE B3-B14 FOR ECO40 ALTERNATORS
MECC ALTE PTCK150 TEMPERATURE SENSOR (1 SET OF 3) FOR ECO40 ALTERNATORS
MECC ALTE PT100 RTD SENSOR ON WINDINGS (1 OF 3) FOR ECO40 ALTERNATORS
MECC ALTE PT100 RTD SENSOR ON WINDINGS (2 OF 3) FOR ECO40 ALTERNATORS
MECC ALTE PT100 RTD (FOR BEARING) FOR ECO40 ALTERNATORS
MECC ALTE BIMETALLIC PROBE (THERMAL PROTECTION) FOR ECO40 ALTERNATORS
MECC ALTE DSR AVR (FACTORY FITTED ONLY) FOR ECO40 ALTERNATORS
MECC ALTE USB 2 DxR DIGITAL INTERFACE FOR ECO40 ALTERNATORS
MECC ALTE DER2 AVR (THREE PHASE SENSING INTEGRATED USB) (+/- 0.5%) (FACTORY FITTED ONLY) FOR ECO40 ALTERNATORS
MECC BASLER DECS150 FOR ECO40 ALTERNATORS
MECC ALTE PMG - KIT PERMANENT MAGNET GENERATOR (FACTORY FITTED OR INTEGRABLE) FOR ECO40 ALTERNATORS
MECC ALTE PMG - KIT PERMANENT MAGNET GENERATOR (FACTORY FITTED OR INTEGRABLE) FOR ECO40 ALTERNATORS
MECC ALTE ADDITIONAL BRIDGES ECO40 CONNECTION FOR ECO40 ALTERNATORS
MECC ALTE IP23 PROTECTION (RECOMMENDED FOR MARINE USE) FOR ECO40 ALTERNATORS
MECC ALTE AIR FILTER FOR REAR INLET (LOSS 7%) FOR ECO40 ALTERNATORS
MECC ALTE IP45 PROTECTION SCREEN (DERATING APPLIES) FOR ECO40 ALTERNATORS
MECC ALTE ANTI-CONDENSATION HEATER - REAR PART (FACTORY FITTED) FOR ECO40 ALTERNATORS
MECC ALTE ANTI-CONDENSATION HEATER - FRONT PART (FACTORY FITTED) FOR ECO40 ALTERNATORS
MECC ALTE ANTI-CONDENSATION HEATER ON THE REAR SHIELD (CAN BE INTEGRATED) FOR ECO40 ALTERNATORS
MECC ALTE ANTI-CONDENSATION HEATER ON THE REAR SHIELD (CAN BE INTEGRATED) FOR ECO40 ALTERNATORS
MECC ALTE GREY IMPREGNATION + (GREY MAIN STATOR AND BLACK EXCITER STATOR) FOR ECO40 ALTERNATORS
MECC ALTE GREY IMPREGNATION + (GREY MAIN STATOR AND BLACK EXCITER STATOR) FOR ECO40 ALTERNATORS
MECC ALTE TOTAL IMPREGNATION + (BLACK MAIN STATOR & EXCITER STATOR, GREY ROTOR) FOR ECO40 ALTERNATORS
MECC ALTE MEASURING CURRENT TRANSFORMER TA (POWER 550 KVA, k 1k/5) FOR ECO40 1L ALTERNATORS
MECC ALTE MEASURING CURRENT TRANSFORMER TA (POWER 550 KVA, k 1k/5) FOR ECO40 1L ALTERNATORS
MECC ALTE PROTECTION CURRENT TRANSFORMER TA (POWER 550 KVA, k 1k/5) FOR ECO40 1L ALTERNATORS
MECC ALTE PROTECTION CURRENT TRANSFORMER TA (POWER 550 KVA, k 1k/5) FOR ECO40 1L ALTERNATORS
MECC ALTE MEASURING AND PROTECTION CURRENT TRANSFORMER TA (POWER 550 KVA) FOR ECO40 1L ALTERNATORS
MECC ALTE MEASURING AND PROTECTION CURRENT TRANSFORMER TA (POWER 550 KVA) FOR ECO40 1L ALTERNATORS
- Phase
- Single phase / Three phase
- Maximum power single phase (KW)
- 315
- Continuous power single phase (KW)
- 292
- Maximum power single phase (KVA)
- 315
- Continuous power single phase (KVA)
- 292
- Maximum power three phase (KW)
- 481
- Continuous power three phase (KW)
- 440
- Maximum power three phase (KVA)
- 601
- Continuous power three phase (KVA)
- 550
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 230 / 400
- Engine rpm (rpm)
- 1500 / 1800
- Poles
- 4
- Single-phase power (KVA)
- 315
- Three-phase power (KVA)
- 601
- Efficiency (%)
- 95
- Protection degree
- IP23
- Acoustic pressure
- 82 dB(A) at 7 m
- Brushes
- No
- PMG
- Optional
- Type of alternator
- Constant Speed
- Voltage regulator
- AVR
- Weight (Kg)
- 1305