MECC ALTE ES20F-200 SINGLE PHASE ALTERNATOR 11 KVA AVR
Phase: Single phase
Maximum single phase power: 11.8 KW
Continuous single phase power: 11 KW
Maximum single phase power: 11.8 KVA
Continuous single phase power: 11 KVA
Frequency: 50 Hz
Voltage: 115 V / 230 V
Protection: IP23
Rpm speed: 3000 rpm
Poles: 2
Efficiency: 80.7%
Weight: 56 Kg
Constant speed alternator
Brushes
Voltage regulator: AVR
- Phase
- Single phase
- Maximum power single phase (KW)
- 11.8
- Continuous power single phase (KW)
- 11
- Maximum power single phase (KVA)
- 11.8
- Continuous power single phase (KVA)
- 11
- Frequency (Hz)
- 50
- Voltage (V)
- 115 / 230
- Engine rpm (rpm)
- 3000
- Poles
- 2
- Single-phase power (KVA)
- 11.8
- Efficiency (%)
- 80.7
- Protection degree
- IP23
- Acoustic pressure
- 65 dB(A) at 7 m
- Length (mm)
- 445
- Width (mm)
- 245
- Height (mm)
- 296
- Brushes
- Yes
- PMG
- No
- Type of alternator
- Constant Speed
- Voltage regulator
- AVR
- Weight (Kg)
- 56
Designed to be exceptionally versatile, these portable products are manufactured to be suitable for all applications where an easy transportable energy source is needed. These portable alternators are available with a 50 or 60 Hz frequency, all with 2 poles ranging from 1 - 18 KVA available either as single bearing or as twin bearing with a double support. In order to couple them to a prime mover it is possible to choose among a wide range of shafts, flanges and couplings. The 2 pole rotors have a damper cage and the stator windings have a shortened pitch to reduce the harmonic content. The single phase units are designed brushless and have a high operating reliability. Minimal maintenance is required as there are no collectors or sliding contacts. The three phase range is designed with brushes and a slip ring and is transformer-controlled. This enables a high pick-up capacity ideal for motor start applications.
For more specialist applications, a high performance range of Automatic Voltage Regulator (AVR) machines is available. The ES range is single phase AVR-controlled but designed with brushes and a slip ring to allow for good voltage regulation and improved motor starting; supply loads different than power factor 1.0 such as modern electronics or pumps. The ET alternators are a three phase version of this type of machine. Both types have adjustable voltage output, a stabilizing point and under frequency protection as standard.
In addition, it's possible to also supply a capacitor-controlled AVR, the RCM/2, which improves voltage control to 2.5% available on the machines without brushes.
The single phase portable series is manufactured according to, and to comply with, the most common specifications such as CEI 2-3, IEC 34-1, EN 60034-1, IEC 34-1, VDE 0530, BS 4999-5000, NF C 51-111, CAN/CSA-C22.2 No100-95. It also complies with the European Community Standards: 72/23, 98/37, 89/336. The three phase portable series is manufactured according to CEI 2-3, IEC 34-1, EN 60034-1, IEC 34-1, VDE 0530, BS 4999-5000, NF C 51-111.
Not binding images and technical data.
MECC ALTE HIGH BLIND TERMINAL BOX FOR S20F/ES20F ALTERNATORS
MECC ALTE AUTOMATIC VOLTAGE REGULATOR RCM (LOOSE) FOR S20F/ES20F ALTERNATORS
- Phase
- Single phase
- Maximum power single phase (KW)
- 11.8
- Continuous power single phase (KW)
- 11
- Maximum power single phase (KVA)
- 11.8
- Continuous power single phase (KVA)
- 11
- Frequency (Hz)
- 50
- Voltage (V)
- 115 / 230
- Engine rpm (rpm)
- 3000
- Poles
- 2
- Single-phase power (KVA)
- 11.8
- Efficiency (%)
- 80.7
- Protection degree
- IP23
- Acoustic pressure
- 65 dB(A) at 7 m
- Length (mm)
- 445
- Width (mm)
- 245
- Height (mm)
- 296
- Brushes
- Yes
- PMG
- No
- Type of alternator
- Constant Speed
- Voltage regulator
- AVR
- Weight (Kg)
- 56