0
Power supply: Diesel
Phase Type: Single-phase
Emergency power: 11 kVA
Emergency power: 8,8 kW
Continuous power: 10 kVA
Continuous power: 8 kW
Power factor (cosfì) 0,8
Rated voltage (Volt) 230
Frequency (Hz) 50
Speed (r.p.m.) 1500
Under the following environmental conditions:
- Ambient temperature 25 °C - barometric pressure 1000 mbar - relative humidity 30%.
The group is set up with:
Motor: PERKINS type 403A-11G
Cylinders: 3 in-line
Water Cooling
Speed regulator Mechanical
Engine power (HP): 11.2
Motor power (kW): 8,4
Cubic Capacity (cm³): 1131
Fuel consumption at 75% of load (lt/hr): 2.3
Starting: 12V
Synchronous ALTERNATOR of primary brand,
Rated power KVA: 10
Voltage regulation: Condenser
Width: 1600 mm
Length: 700 mm
Height: 1050 mm
Dry weight: 420 kg
N.1 SERIES of elastic supports placed between motor/alternator and base.
N.1 BASED in welded and painted steel on which the engine and alternator are mounted and connected in
single support coupling, with lamellar joint.
N.1 Fuel tank with key cap, incorporated in the base of the capacity of 50 lt., It is included
the leakage containment basin.
ISO 9001
CERTIFIED
No. 50 100 6658
N.1 INSONORIZED CABIN for outdoor use In steel, painted with epoxy powders RAL5015, to guarantee an optimal resistance to corrosion. Fire-resistant soundproofing material with high noise reduction.
Excellent accessibility for ordinary and extraordinary maintenance through robust access doors.
lockable. Residential silencer muffler that cuts 35db.
N.1 SILENCED HOSE for exhaust gases, RESIDENTIAL type, mounted inside the cabin,
with a reduction value from free discharge to muffler inserted of about 35 db.
N.1 SERIES of maintenance-free lead-acid batteries (mounted on the group) for starting the
motor with electrolyte supplied separately.
AUTOMATIC ELECTRIC FRAMEWORK WITH mains/group switching
Automatic control and command logic complete with PLC that allows the visualization and programming of all electrical parameters.
Circuit breaker 4-pole primary brand of adequate capacity.
Easily settable perioda test system. Battery charge maintainer(s).
Power and command output terminal block. Wiring diagrams for easy and correct installation.
Power supply: Diesel
Phase Type: Single-phase
Emergency power: 11 kVA
Emergency power: 8,8 kW
Continuous power: 10 kVA
Continuous power: 8 kW
Power factor (cosfì) 0,8
Rated voltage (Volt) 230
Frequency (Hz) 50
Speed (r.p.m.) 1500
Under the following environmental conditions:
- Ambient temperature 25 °C - barometric pressure 1000 mbar - relative humidity 30%.
The group is set up with:
Motor: PERKINS type 403A-11G
Cylinders: 3 in-line
Water Cooling
Speed regulator Mechanical
Engine power (HP): 11.2
Motor power (kW): 8,4
Cubic Capacity (cm³): 1131
Fuel consumption at 75% of load (lt/hr): 2.3
Starting: 12V
Synchronous ALTERNATOR of primary brand,
Rated power KVA: 10
Voltage regulation: Condenser
Width: 1600 mm
Length: 700 mm
Height: 1050 mm
Dry weight: 420 kg
SHARE