FISCHER PANDA AGT-DC 8000-48V PMS Marine Generators DC Variable Speed 6.4 kW
Phase Type: Single-phase
Maximum Output: 8000 W
Continuous Output: 6400 W
Maximum Output: 8 kVA
Continuous Output: 6.4 kVA
Frequency: 50 Hz
Voltage: 48 V
Inverter
Engine rpm: 2200-2600 rpm
Dispacement: 719 cc.
Cooling: Water
Sound pressure: 53 dB(A) at 7 m
Length: 660 mm
Width: 515 mm
Height: 594 mm
Dry weight: 160 Kg
- Phase
- Single phase
- Maximum power single phase (KW)
- 8
- Continuous power single phase (KW)
- 6.4
- Maximum power single phase (KVA)
- 8
- Continuous power single phase (KVA)
- 6.4
- Fuel
- Diesel
- Frequency (Hz)
- 50
- Voltage (V)
- 48
- Engine
- Kubota D722
- Engine rpm (rpm)
- 2200 - 2600
- Speed governor
- Electronic
- Engine capacity (cm³)
- 719
- Number cylinders
- 3
- Oil capacity (L)
- 3.8
- Cooling
- Water
- Poles
- 2
- Bore x stroke (mm)
- 67 x 68
- Motor insulation class
- H
- Length (mm)
- 660
- Width (mm)
- 515
- Height (mm)
- 594
- Dry weight (Kg)
- 160
- Silenced
- Yes
- Super silenced
- Yes
- Product type
- Generator
- Voltage regulator
- Inverter
- Engine manufacturer
- Kubota
FISCHER PANDA AGT-DC8000 48V SUPER-SILENCED MARINE GENERATOR 6.4 KW
Fischer Panda AGT-DC8000 48V single-phase 6.4 KW marine generator with variable speed motor from 2200 rpm to 2600 rpm. The Fischer Panda AGT-DC8000 48V marine generator is designed with a soundproof cabin that makes it supersilenced. The Fischer Panda AGT-DC8000 24V marine generator is built with a diesel-powered Kubota engine. The alternator of the Fischer Panda AGT-DC8000 48V marine generator is 2-pole and H-insulation class. With its compact size and low weight, the Fischer Panda AGT-DC8000 48V marine generator is also suitable for installation on small boats.
Hybrid AC power - indirect AC
Battery charging generators produce direct current and generally operate as part of a hybrid power system. Battery levels are monitored and charged automatically by the generator. An inverter supplies power to 230 V consumers on board. These systems are ideal for typically variable power demands that do not require a generator to run constantly throughout the day.
Ideal for systems where the generator runs for short intervals to charge the power bank and support periods of peak power.
In this version, the charging voltage is controlled by an integrated AGT controller that regulates the motor revolutions.
The motor revolutions can therefore be varied to achieve the required performance. However, when installing this version, the batteries must be positioned close to the generator.
TECHNICAL CHARACTERISTICS Fischer Panda AGT-DC8000
Type of phase: Single-phase
Maximum single-phase power: 8 KW
Single-phase continuous power: 6.4 KW
Frequency: 50 Hz
Voltage: 48 V
Inverter
Engine speed: 2200-2600 rpm
Displacement: 719
Cooling: Water
Acoustic pressure: 53 dB(A) at 7 m
Length: 660 mm
Width: 515 mm
Height: 594 mm
Dry weight: 160 kg
Included in the version
4 vibration dampers BRB 70 A40
Fischer Panda muffler d. 40 mm
Fischer Panda anti-siphon with air valve
Diesel filter with water separator WS180
Smoke separator FP diameter 40-25-40 mm
- Designed for DC-AC power systems with battery plus inverter
- The generator is only required to operate intermittently
- Optimal utilisation of the generator
- High degree of efficiency
- Compact design
- Reduced fuel consumption
- Phase
- Single phase
- Maximum power single phase (KW)
- 8
- Continuous power single phase (KW)
- 6.4
- Maximum power single phase (KVA)
- 8
- Continuous power single phase (KVA)
- 6.4
- Fuel
- Diesel
- Frequency (Hz)
- 50
- Voltage (V)
- 48
- Engine
- Kubota D722
- Engine rpm (rpm)
- 2200 - 2600
- Speed governor
- Electronic
- Engine capacity (cm³)
- 719
- Number cylinders
- 3
- Oil capacity (L)
- 3.8
- Cooling
- Water
- Poles
- 2
- Bore x stroke (mm)
- 67 x 68
- Motor insulation class
- H
- Length (mm)
- 660
- Width (mm)
- 515
- Height (mm)
- 594
- Dry weight (Kg)
- 160
- Silenced
- Yes
- Super silenced
- Yes
- Product type
- Generator
- Voltage regulator
- Inverter
- Engine manufacturer
- Kubota