- New

STANDARD ACCESSORIES:
Electronic Control Unit;
Pre-filters with pre-installed cartridges;
Maintenance Kit; (N.1 filter change + chemical washing products).
Frequency (Hz) 50 / 60
Voltage (V) 230 / 400
Dry Weight (Kg) 60
Production (Liters/hour) - (Liters/day) 440 lit / 116.23 gal - 10560 lit / 2789 gal
Salt Rejected Minimum 99.2%, Average 99.4%
Pressure Regulation Manual
Salinity Monitoring Electronic automatic monitoring
Temperature Level Max. 102°F / 39°C, Min. 36°F / .2°C
Chlorine Tolerance (PPM) 0.1
pH Level 3-11
Inlet System Pressure Inlet water: Max 58 psi / 4 bar
System Working Pressure Nominal seawater 145 psi / 10 bar
High Pressure Pump Electric Motor (Hz-V-Hp-kW) 50/60-230/400-1-0.75
Salinity Level Designed for water up to 2,000 PPM
The OSMOSEA OSMO4 REVERSE OSMOSIS SYSTEM 440LT - 230V is an advanced system for the production of high-quality fresh water,
designed for applications where significant water production is required. With a production capacity of 440 liters/hour (10560 liters/day),
this system is ideal for maritime, industrial, or large residential uses.
Main Features:
Advanced Monitoring:
Digital display for visualizing the salinity of the produced water in Micro Siemens (µS).
Manometers for controlling inlet and high pressure.
Electronic control unit for automatic management of functions.
Inlet and high pressure control system.
AFS (Automatic Flushing System) for automatic membrane flushing.
Technical Specifications:
Nominal Performance / Produced Water Performance: +-15% at 116 PSI / 8 BAR, 77°F / 25°C & 2,000 PPM TDS
Production Liters/hour Liters/day: 440 lit / 116.23 gal 10560 lit / 2789 gal
Salt rejected: Minimum 99.2%, Average 99.4%
Produced Water Temperature: Ambient (as inlet water)
Pressure Regulation: Manual
Salinity Monitoring: Electronic automatic monitoring. Temperature compensated. Salinity monitoring components provide continuous reading in Micro Siemens and are designed with a safe design.
Salinity Level: Designed for water up to 2,000 PPM TDS (NaCl)
Temperature Level: Max. 102°F / 39°C, Min. 36°F / .2°C
Reverse osmosis membranes: High selective rejection/High performance tri-polyamide, thin film composite, spiral wound, single pass.
Chlorine tolerance: 0.1 PPM
pH Level: 3-11
Inlet Water System Pressure: Max 58 psi / 4 bar
Nominal Seawater System Working Pressure: 145 psi / 10 bar
Water Connections Feed inlet: 3/4” F
Water Connections Concentrate discharge: 3/8” F
Water Connections Product: 3/8” F
Total Weight: 60 Kg
Electrical Requirements (HP = Horse Power; kW = Full Load Amperes) High Pressure Pump Electric Motor Hz V Hp kW: 50/60 230/400 1 0.75
Recommended Switch Voltage, Hz and Phase Thermal Magnetic Switch Size 230 VAC: 32 Amp
Recommended Switch Voltage, Hz and Phase Thermal Magnetic Switch Size 400 VAC: 18 Amp
Looking for a product similar to this Osmosea but with different characteristics?HERE you can find the area dedicated to purifiers or other brands similar to Osmosea.
Images and technical data are not binding. Please always refer to the technical data sheet issued by the manufacturer. Manel service does not assume responsibility for any changes made by the manufacturer.