FINI PULSAR EVO BK120-500-10-ES COMPRESSOR 10HP
Voltage: 400 V
Frequency: 50 Hz
Pump: BK120
Capacity cylinder: 500 l
Revolutions: 1100 RPM
Power: 7.5 KW - 10 HP
Air output: 1080 Lt/min - 38. 1 cfm
Pressure: 10 bar - 145 psi
BSP: 2'
Acoustic pressure: 64 dB(A)
Length: 2005 mm
Width: 970 mm
Height: 1660 mm
Weight: 438 Kg
- Frequency (Hz)
- 50
- Voltage (V)
- 400
- Engine rpm (rpm)
- 1100
- Power (KW)
- 7.5
- Pressure (bars)
- 10
- Air output (L/min)
- 1080
- Mechanical power (hp)
- 10
- Acoustic pressure
- 64 dB(A)
- Length (mm)
- 2005
- Width (mm)
- 970
- Height (mm)
- 1660
- Dry weight (Kg)
- 438
FINI PULSAR EVO BK120-500-10-ES COMPRESSOR 10HP
FINI PULSAR EVO BK120-500-10-ES is a silenced compressor with a capacity of 500 l. It can deliver a maximum pressure of 10 bar by means of a BK120 pump with a power of 7.5KW.
The duration and efficiency of the compressor is largely determined by the number of revolutions per minute of the head. The lower the number of revolutions, the longer the life of the compressor. The reduction of the number of revolutions is obtained by means of pulleys of different diameters applied to the motor and the head respectively.
The induction motor of the FINI PULSAR EVO is characterized by its long life and low maintenance requirements. In fact, this motor is brushless, the main component subject to wear in electric motors. The motor of the FINI PULSAR EVO is covered with soundproof panels that reduce the noise level, allowing the use of the compressor also in difficult rooms.
Between the compressor and the user equipment, FINI PULSAR EVO BK120-500-10-ES integrates a dryer dedicated to the treatment of compressed air, which is widely used in medical compressor installations. The dryer guarantees quality and purity of the compressed air generated, favouring a correct and long-lasting functioning of the downstream equipment with consequent reduction of maintenance costs.
The FINI PULSAR EVO is supplied complete with pressure regulator with double compressed air outlet, 500L tank. The FINI PULSAR EVO, thanks to its pump unit, is able to deliver a power of 10Hp - 7500W. Equipped with 2 cylinders, its maximum pressure is 10 bar, it is lubricated and its motor reaches a speed of 1100rpm.
TECHNICAL CHARACTERISTICS FINI PULSAR EVO BK120-500-10-ES
Voltage: 400 V
Frequency: 50 Hz
Pump: BK120
Capacity cylinder: 500 l
Revolutions: 1100 RPM
Power: 7.5 KW - 10 HP
Air output: 1080 Lt/min - 38. 1 cfm
Pressure: 10 bar - 145 psi
BSP: 2'
Acoustic pressure: 64 dB(A)
Length: 2005 mm
Width: 970 mm
Height: 1660 mm
Weight: 438 Kg
If you are looking for another product then you can see on our catalog other compressors FINI or other specialized brands.
Images and technical data are not binding and may be subject to revision by the manufacturer.
- Frequency (Hz)
- 50
- Voltage (V)
- 400
- Engine rpm (rpm)
- 1100
- Power (KW)
- 7.5
- Pressure (bars)
- 10
- Air output (L/min)
- 1080
- Mechanical power (hp)
- 10
- Acoustic pressure
- 64 dB(A)
- Length (mm)
- 2005
- Width (mm)
- 970
- Height (mm)
- 1660
- Dry weight (Kg)
- 438