LARIUS SE9022 DIAPHRAGM PUMP FOR SANITIZERS

LARIUS SE9022 ELECTRIC PUMP FOR SANITIZERS

LARIUS SE9022 MEMBRANE PUMP FOR SANITIZING SPRAYING, VERSION WITH 50 LITRE TANK.

The LARIUS SE9022 electric pump for sanitizing agents is suitable for intensive use: high pressure (250 Bar), wheeled diaphragm electric pump with capacity for medium-large environments, such as offices, industrial sheds, schools, tensile structures, common areas of condominiums, buses, vans, trucks, small and medium boats.

LARIUS SE9020 is a sprayer for sanitizing agents suitable for use in dangerous and heavy duty environments; exceptional in fighting pathogens such as bacteria, moulds and viruses.
It is available with a 50 litre PVC tank, very useful in case you need to sanitise very large areas without wasting time.

CHARACTERISTICS OF THE LARIUS SE9022 MEMBRANE ELECTRIC PUMP FOR SANITIZING AGENTS

- High pressure, electric diaphragm pump with aluminium body and Nylon diaphragm.
- Use on medium and large surfaces.
- Pump on trolley, can supply two users simultaneously.
- Possibility to regulate the fluid pressure.
- Can be used with 200lt drums, 1000lt IBC and small cans.
- Self-priming pump.
- Select suction, hose and gun accessories in the accessories section.
- Version without tank available.

Type of product: Electric Membrane Pump
Type of material treated: Sanitizers
Phase type: Single-phase
Voltage: 220V
Frequency: 50 Hz
Engine power: 2.2 Kw
Maximum Fluid Pressure: 250 Bar
Maximum flow rate: 8 litres per minute
Materials in contact with the fluid: aluminium, galvanized steel, tungsten carbide, Nylon

THE LARIUS SE9022 DIAPHRAGM PUMP FOR SANITIZERS SUPPORTS THE FOLLOWING ACCESSORIES:

Mod LARIUS SE9050
High pressure spray gun, max 250 bar. Includes spray nozzle (mod SFC 13 60) and 1/4" swivel fitting to connect to the hose.
Mod LARIUS SFC 13-60 Sanitizing spray nozzle. Included in the gun and PLA lances.

Extensions for LARIUS gun
Mod 155. Length 60 cm
Mod 156. Length 100 cm

Gun LARIUS PLA
Ideal application lance to reach high places and difficult to access; with closure at the end of the extension to avoid product loss. Lance equipped with Z-fitting for nozzle positioning. Nozzle SFC 13 60 included
Mod SE9060. PLA gun, length 130 cm
Mod SE9061. PLA gun, length 180 cm
Mod SE9062. PLA gun, length 240 cm

LARIUS SE9022 SUPPORTS THE FOLLOWING HIGH-PRESSURE HOSES
High Pressure Hoses 1/4" - 228 bar

18024 15 m
18024/20 20 m
18024/25 25 m
18024/30 30 m

The image is for indicative purposes only