LARIUS SE9032 MEMBRANE MOTOR PUMP FOR SANITIZERS

LARIUS SE9032 MEMBRANE PISTON PUMP FOR SANITIZERS

LARIUS SE9032 PETROL MOTOR-PUMP WITH WHEELED MEMBRANE FOR SPRAYING SANITIZERS WITH 50 LITRE TANK.

The LARIUS SE9032 motor-pump for sanitizing agents is suitable for intensive use: high pressure (210 Bar) electric diaphragm pump with flow rate for medium-large environments, such as offices, industrial sheds, schools, tensile structures, common areas of condominiums, buses, vans, trucks, small and medium boats.

LARIUS SE9032 is a sprayer for sanitizers suitable for use in hazardous and heavy-duty environments; exceptional in combating pathogens such as bacteria, mold and viruses.
The powerful Yamaha petrol engine allows its use even where mains power supply is not possible. Version with 50 Litre tank.

CHARACTERISTICS OF THE MEMBRANE MOTOR PUMP FOR LARIUS SE9032 SANITIZERS

- Independent spraying equipment, recommended for outdoor use.
- Mounted on an easy to manoeuvre trolley, it includes a 5.5 HP petrol Yamaha engine connected to a high pressure diaphragm pump via a drive belt.
- Equipment capable of powering two guns simultaneously.
- Possibility of fluid pressure regulation.
- Possibility to choose between model with suction from 30lt drum or model with 50lt tank in PVC.
- Order pipes and gun separately

Type of product: Membrane motor pump
Type of material treated: Sanitizers
Phase type: Single-phase
Power supply: Gasoline
Voltage: 220V
Frequency: 50 Hz
Engine power: 5.5 Hp
Maximum Fluid Pressure: 210 Bar
Tank capacity: 50 Liters
Maximum flow rate: 4 litres per minute
Materials in contact with the fluid: aluminum, galvanized steel, tungsten carbide, Nylon

THE LARIUS SE9032 PISTON PUMP FOR SANITIZERS SUPPORTS THE FOLLOWING ACCESSORIES:

Mod LARIUS SE9050
High pressure spray gun, max 250 bar. Includes spray nozzle (mod SFC 13 60) and 1/4" swivel fitting to connect to the hose.
Mod LARIUS SFC 13-60 Sanitizing spray nozzle. Included in the gun and PLA lances.

Extensions for LARIUS gun
Mod 155. Length 60 cm
Mod 156. Length 100 cm

Gun LARIUS PLA
Ideal application lance to reach high places and difficult to access; with closure at the end of the extension to avoid product loss. Lance equipped with Z-fitting for nozzle positioning. Nozzle SFC 13 60 included
Mod SE9060. PLA gun, length 130 cm
Mod SE9061. PLA gun, length 180 cm
Mod SE9062. PLA gun, length 240 cm

LARIUS SE9032 SUPPORTS THE FOLLOWING HIGH-PRESSURE HOSES
High Pressure Hoses 1/4" - 228 bar

18024 15 m
18024/20 20 m
18024/25 25 m
18024/30 30 m

The image is for indicative purposes only