- New
![SATEPA UV Steriliser UVC30A - Adaptor with Plug-in Power Supply SATEPA UV Steriliser UVC30A - Adaptor with Plug-in Power Supply](https://www.manelservice.com/51231-large_default/satepa-uv-steriliser-mono-uvc30a-adaptor-with-plug-in-power-supply.jpg)
AISI 304 capacity steriliser with initial UV dose 40,000 W/cm2
Available with optional irradiance and temperature sensor
ADAPTOR 'A' version available with SHUKO socket or feed-through cable
Maximum flow rate: 1.5 m3/h - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/h - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
Lamp: 1x30W, lifetime 9,000 hr
Frame size: 65 x 12 mm H=60mm
Degree of protection: IP 54
Absorption: 40 Watt
Power supply voltage: 230 Vac ± 10% @ 50/60 Hz
Chamber dimensions: Total H 530 mm ; Ø 60.30 mn
Working position: Vertical / horizontal
Hydraulic connection: ¾" male threaded
Maximum pressure: 10 Bar standard
Product dimensions: 450 x 60.30 mm
I/O: ¾"
Lamp: 1 x 30W
The UVC30A UV Steriliser - Adaptor with Plug-in Power Supply from SATEPA is the ideal solution for efficient and safe water debacterisation in a variety of applications. Thanks to its advanced technology and compact design, this device is perfect for use in domestic, commercial and industrial environments.
Key features:
Proven efficacy: Harnesses the power of UV-C rays with a wavelength of 254 nm to eliminate bacteria, viruses and other microorganisms from water, ensuring deep and complete disinfection.
Low-pressure mercury vapour lamp: Offers a long life of up to 9,000 hours and high effectiveness in water debacterialisation.
High-quality quartz sheath: Protects the lamp and ensures optimal UV-C transmission for uniform debacterisation.
Plug-in power supply: Easy to install and use, allowing the UV steriliser to be plugged into any standard electrical outlet.
Lamp monitor with red/green LED: Indicates lamp status, facilitating preventive maintenance.
SCHUKO/EU plug: Compatible with the most common electrical sockets in Europe.
Compact and versatile design: Its small dimensions (200 x 160 x 90 mm) make it ideal for installation in tight spaces.
High adaptability: Can be installed vertically or horizontally to adapt to any location.
Standard hydraulic connections: ¾" male threaded for easy connection to existing piping.
Maximum pressure of 10 Bar: Suitable for a wide range of applications.
Technical characteristics:
Maximum flow rate: 1.5 m3/h - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/h - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
Lamp: 1x30W, lifetime 9,000 hr
Frame size: 65 x 12 mm H=60mm
Degree of protection: IP 54
Absorption: 40 Watt
Power supply voltage: 230 Vac ± 10% @ 50/60 Hz
Chamber dimensions: Total H 530 mm ; Ø 60.30 mn
Working position: Vertical / horizontal
Hydraulic connection: ¾" male threaded
Maximum pressure: 10 Bar standard
Product dimensions: 450 x 60.30 mm
I/O: ¾"
Lamp: 1 x 30W
Looking for a UV steriliser with different features? Click HERE.
Images and technical data purely indicative.