0
Maximum flow rate: 2.8 m3/hr - 2800 l/hr - 12.30 GPM @ 30,000 µWsec/cm2 - 2.4 m3/hr - 2400 l/hr - 10.60 GPM @ 40,000 µWsec/cm2
Lamps: 1 x 40W UV-C low-pressure lamps
Reactor size: Total H: 450 mm - Ø 60.30 mm
Form Factor: "C" tube
Working position: Vertical / Horizontal
Hydraulic connections: ¾" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Dimensions: 120 x 65 x 45 mm
Power Supply: High efficiency electronic power supply
Lamp control: Lamp monitoring with red/green LED§
Electrical connection: SCHUKO/EU plug or feed-through cable
Lamp cable: 1.5 mt included
Operating voltage: 90 to 240 Vac
Electrical consumption: 40 watts
IP rating: IP54
1" I/O connection
The UVC40A UV Steriliser - Adaptor with Plug-in Power Supply from SATEPA is the ideal solution for efficient and safe water debacterisation in a variety of applications. Thanks to its advanced technology and compact design, this device is perfect for use in domestic, commercial and industrial environments.
Key features:
Proven efficacy: Harnesses the power of UV-C rays with a wavelength of 254 nm to eliminate bacteria, viruses and other microorganisms from water, ensuring deep and complete disinfection.
Low-pressure mercury vapour lamp: Offers a long life of up to 9,000 hours and high effectiveness in water debacterialisation.
High-quality quartz sheath: Protects the lamp and ensures optimal UV-C transmission for uniform debacterisation.
Plug-in power supply: Easy to install and use, allowing the UV steriliser to be plugged into any standard electrical outlet.
Lamp monitor with red/green LED: Indicates lamp status, facilitating preventive maintenance.
SCHUKO/EU plug: Compatible with the most common electrical sockets in Europe.
Compact and versatile design: Its small dimensions (200 x 160 x 90 mm) make it ideal for installation in tight spaces.
High adaptability: Can be installed vertically or horizontally to adapt to any location.
Standard hydraulic connections: ¾" male threaded for easy connection to existing piping.
Maximum pressure of 10 Bar: Suitable for a wide range of applications.
Technical characteristics:
Maximum flow rate: 2.8 m3/hr - 2800 l/hr - 12.30 GPM @ 30,000 µWsec/cm2 - 2.4 m3/hr - 2400 l/hr - 10.60 GPM @ 40,000 µWsec/cm2
Lamps: 1 x 40W UV-C low-pressure lamps
Reactor size: Total H: 450 mm - Ø 60.30 mm
Form Factor: "C" tube
Working position: Vertical / Horizontal
Hydraulic connections: ¾" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Dimensions: 120 x 65 x 45 mm
Power Supply: High efficiency electronic power supply
Lamp control: Lamp monitoring with red/green LED§
Electrical connection: SCHUKO/EU plug or feed-through cable
Lamp cable: 1.5 mt included
Operating voltage: 90 to 240 Vac
Electrical consumption: 40 watts
IP rating: IP54
1" I/O connection
Looking for a UV steriliser with different features? Click HERE.
Images and technical data purely indicative.
Maximum flow rate: 2.8 m3/hr - 2800 l/hr - 12.30 GPM @ 30,000 µWsec/cm2 - 2.4 m3/hr - 2400 l/hr - 10.60 GPM @ 40,000 µWsec/cm2
Lamps: 1 x 40W UV-C low-pressure lamps
Reactor size: Total H: 450 mm - Ø 60.30 mm
Form Factor: "C" tube
Working position: Vertical / Horizontal
Hydraulic connections: ¾" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Dimensions: 120 x 65 x 45 mm
Power Supply: High efficiency electronic power supply
Lamp control: Lamp monitoring with red/green LED§
Electrical connection: SCHUKO/EU plug or feed-through cable
Lamp cable: 1.5 mt included
Operating voltage: 90 to 240 Vac
Electrical consumption: 40 watts
IP rating: IP54
1" I/O connection
SHARE