SATEPA UV Steriliser MONO UVC30D3 - Display UV CUBE

SATEPA UV Sterilizer MONO UVC30D3 - Display UV CUBE

SATEPA UV Sterilizer UVC30D3 - Display UV CUBE is a device designed for disinfection of drinking and industrial water using UV-C radiation. Its effectiveness is based on the emission of UV-C radiation at a wavelength of 254 nm, which can inactivate,
pathogenic microorganisms such as bacteria, viruses, and protozoa.

Advantages:

High disinfection effectiveness: Eliminates pathogenic microorganisms§

Safe and environmentally friendly: Does not use chemicals that are harmful to the environment

Low energy consumption: Reduces operating costs

Low maintenance: Easy to install and operate

Versatility: Suitable for a wide range of applications

Key Features:

Maximum flow rate: 1.5 m3/Hr - 1500 l/hr - 6.60 GPM @ 30,000 µWsec/cm2 1.2 m3/Hr - 1200 l/hr - 5.28 GPM @ 40,000 µWsec/cm2
Lamps: 1x30W, life hours 9,000
Reactor dimensions: Total H: 450 mm - Ø 60.30 mm
Form Factor: "C"-shaped tube
Working position: Vertical / Horizontal
Hydraulic connections: ¾" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Panel dimensions: 180 x 180 x 90 mm
Display: White/blue backlit LCD display 2x8 characters
Lamp control: Single lamp management with end of lamp life alarm through LEDs/relays Counts: Total system life hours counting Partial lamp life counting Resettable lamp change counting
Commands: Stand By command with "OK" button ON/OF
Remote ON/OFF Lamp on mode with water flow Solenoid valve closing mode in case of lamp off Customizations: Customizable input signal
Alarms: Dry-contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac IP rating: IP 54 (IP 65 optional) Power consumption: 30 Watts Power supply: 230 Vac ± 10% @ 50/60 Hz
product dimensions: 450 x 60.30 mm

Looking for a UV steriliser with different features? Click HERE.

Images and technical data purely indicative.