SATEPA UV Steriliser MONO UVC65D3- Display UV CUBE

SATEPA UV Sterilizer MONO UVC30D3 - Display UV CUBE

SATEPA UV Steriliser UVC80D3 - Display UV CUBE: Product description
SATEPA UV Steriliser UVC80D3 - Display UV CUBE is a device designed for disinfection of drinking and industrial water using UV-C radiation.
Its effectiveness is based on the emission of UV-C radiation at a wavelength of 254 nm, which can inactivate pathogenic microorganisms such as bacteria,
viruses and protozoa.

Main features:

REACTOR:

Maximum flow rate:
6.0 m³/h (6000 l/h) at 30,000 µWsec/cm²
5.0 m³/h (5000 l/h) at 40,000 µWsec/cm²
Lamps: 1x80W, lasting up to 9,000 hours
Ballast dimensions: 928 mm (total height) x Ø 60.30 mm
Finish: 'C' tube
Working position: Vertical or horizontal
Hydraulic connections: 1 ¼" male threaded
Maximum pressure: 10 Bar standard
Materials: AISI 304 (AISI 316 optional)
UV3:
Panel dimensions: 180 x 180 x 90 mm
Display: 2x8 character white/blue backlit LCD
Lamp control: Individual lamp management with end-of-life alarm via LED/relay
Counting:
Total lamp life hour counter
Partial lamp life counting (resettable)
Lamp change counting
Commands:
Stand By command with "OK" button
Remote ON/OFF command
Operating modes:
Lamp switching on with water flow
Solenoid valve closing when lamp off
Customisations: Customisable input signal
Alarms:
Dry contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac
Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac
IP rating: IP 54 (IP 65 optional)
Electrical absorption: 80 Watts
Power supply: 230 Vac ± 10% @ 50/60 Hz
Advantages:
High disinfection effectiveness: Eliminates pathogenic microorganisms
Safe and environmentally friendly: Does not use environmentally harmful chemicals
Low energy consumption: Reduces running costs
Low maintenance: Easy to install and use
Versatility: Suitable for a wide range of applications

Technical characteristics:

Maximum flow rate: 6.0 m3/Hr - 6000 l/hr - 26.0 GPM @ 30,000 µWsec/cm2 5.0 m3/Hr - 5000 l/hr - 22.0 GPM @ 40,000 µWsec/cm2
Lamps: 1x80W, life hours 9,000
Ballast dimensions: Total H: 928 mm - Ø 60.30 mm
Form factor: 'C' tube
Working position: Vertical / Horizontal
Hydraulic connections: 1 ¼" male threaded
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)
Panel dimensions: 180 x 180 x 90 mm
Display: White/blue backlit LCD display 2x8 characters
Lamp control: Individual lamp management with end-of-life lamp alarm via LEDs/relays
Counting: Total lamp life hour counter
Resettable partial lamp life counting
Lamp change counting
Commands: Stand By command with "OK" button
Remote ON/OFF control
Lamp on mode with water flow
Solenoid valve closing mode in case of lamp off
Customisations: Customisable input signal
Alarms: Dry contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac
Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac
IP rating: IP 54 (IP 65 optional) Electrical absorption: 80 Watts
Power supply: 230 Vac ± 10% @ 50/60 Hz
Product dimensions: 928 x 60.30 mm

Looking for a UV steriliser with different features? Click HERE.

Images and technical data purely indicative.