<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-PHW6DPD" height="0" width="0" style="display:none;visibility:hidden">

SATEPA UV Steriliser MONO UVC80D3 - Display LCD

  • New
satepa uv steriliser mono uvc80d3 display lcd
search
  • satepa uv steriliser mono uvc80d3 display lcd
  • SATEPA UV Steriliser UVC40D3 - Display UV CUBE
SATEPA
UVC80D3

Maximum flow rate: 2.8 m3/Hr - 2800 l/hr - 12.30 GPM @ 30,000 µWsec/cm2 2.4 m3/Hr - 2400 l/hr - 10.60 GPM @ 40,000 µWsec/cm2
Panel dimensions: 180 x 180 x 90 mm
Display: 2x8 characters white/blue backlit LCD display
Lamp control: Individual lamp management with end-of-life lamp alarm via LEDs/relays
Counting: Total lamp life hour counter
Resettable partial lamp life counting
Lamp change counting
Commands: Stand By command with "OK" button
Remote ON/OFF control
Lamp on mode with water flow
Solenoid valve closing mode in case of lamp off
Customisations: Customisable input signal
Alarms: Dry contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac
Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac
IP rating: IP 54 (IP 65 optional)
Electrical absorption: 40 Watts
Power supply: 230 Vac ± 10% @ 50/60 Hz
Product dimensions: 928 x 60.30 mm

Technical features
Frequency (Hz)
50 / 60
Protection degree
IP54
Pressure (bars)
10
Product dimensions (mm)
928 x 114
Lamps
2 x 80 W
Power consumption (W)
160 W
Capacity (Lt/h)
9000 - 12000
Output voltage (VAC)
230
Reactor Dimensions
H totale: 928 mm - Ø 114 mm
Form
Z-pipe
job position
Vertical
lamp control
Gestione singola lampada con allarme fine vita lampada attraverso led/relè
Details

SATEPA UV Steriliser MULTI UVC80D3 - DISPLAY LCD 

SATEPA UV MULTI Sterilizer UVC80D3 - LCD Display

UV sterilizer suitable for water debacterialization by UV-C radiation with wavelength of 254nm.

Equipped with 2 low-pressure mercury vapor lamps of 80W electrical power, enclosed in quartz sheaths

purest, driven by high-efficiency electronic power supplies and digital LCD display control unit with sensor of

irradiance and optional temperature with corresponding tube arrangement. 

Key Features SATEPA UV MULTI Sterilizer UVC80D3:

Flow rate:
Maximum: 12 m3/hr - 12000 l/hr - 52.8 GPM @ 30,000 µWsec/cm2
Reduced: 9 m3/hr - 9000 l/hr - 39.6 GPM @ 40,000 µWsec/cm2
Lamps:
2x80W
Lifetime: 9,000 hours

SATEPA Reactor UV MULTI Sterilizer UVC80D3:
Dimensions: Total H: 928 mm - Ø 114 mm
Form Factor: "Z" tube
Working position: Vertical
Hydraulic connections:
1½" male threaded (flange optional)
½" water discharge
Maximum pressure: 10 Bar standard
Material: AISI 304 (AISI 316 optional)

SATEPA MULTI UVC80D3 UV sterilizer control panel:

Dimensions: 180 x 180 x 90 mm
Display: white/blue backlit LCD 2x8 characters
Functionality:
Single lamp management
End of lamp life alarm (LED/relay)

SATEPA UV MULTI UVC80D3 Counts:

Total plant life hour counter
Partial life hour count (resettable)
Lamp change count
Commands:
Stand By with "OK" button
Remote ON/OFF

Technical features SATEPA UV MULTI sterilizer UVC80D3 - LCD display:

Maximum flow rate: 2.8 m3/Hr - 2800 l/hr - 12.30 GPM @ 30,000 µWsec/cm2 2.4 m3/Hr - 2400 l/hr - 10.60 GPM @ 40,000 µWsec/cm2
Panel size: 180 x 180 x 90 mm
Display: 2x8 characters white/blue backlit LCD display
Control: Single lamp management with end-of-life alarm through led/relay
Counts: Total lamp life hour counter
Resettable partial life hours counter
Controls: Stand By command with "OK" button
SATEPA Remote ON/OFF Command
Lamp on mode with water flow
Solenoid valve closing mode when off
Customizations: Customizable input signal
Alarms: Dry contact alarm relay 1 A @ 30Vdc; 0.250 A @ 230 Vac
Power alarm relay 1A @ 30Vdc; 0.250A @ 230 Vac
IP rating: IP 54 (IP 65 optional)
Power consumption: 40 watts
Power supply: 230 Vac ± 10% @ 50/60 Hz
Product dimensions:928 x 60.30 mm
Advantages SATEPA UV MULTI Sterilizer UVC80D3 - LCD Display:
High disinfection effectiveness: Eliminates pathogenic microorganisms
Safe and environmentally friendly: Does not use chemicals harmful to the environment
Low energy consumption: Reduces operating costs
Low maintenance: Easy to install and use
Versatility: Suitable for a wide range of applications

Looking for a  SATEPA UV MULTI Sterilizer UVC80D3 with different features? Click HERE.

Images and technical data purely indicative.

Technical Sheet / Manuals
List price
1.583,56 € tax incl.
1.298,00 € tax excl.
Discounted Price
934,52 € tax incl.
766,00 € tax excl.
Quantity

loader
30,00 € shipped to Italy

Calculate Shipping Cost
Add to wishlist
Download PDF
Ask a question
Product: SATEPA UV Steriliser MONO UVC80D3 - Display LCD
Offer on letterhead
Product: SATEPA UV Steriliser MONO UVC80D3 - Display LCD
Technical features
Frequency (Hz)
50 / 60
Protection degree
IP54
Pressure (bars)
10
Product dimensions (mm)
928 x 114
Lamps
2 x 80 W
Power consumption (W)
160 W
Capacity (Lt/h)
9000 - 12000
Output voltage (VAC)
230
Reactor Dimensions
H totale: 928 mm - Ø 114 mm
Form
Z-pipe
job position
Vertical
lamp control
Gestione singola lampada con allarme fine vita lampada attraverso led/relè
Details
Technical Sheet / Manuals