

Maximum three-phase power: 5 KVA
Three phase maximum power: 4 KW
Three phase continuous use power: 4.5 KVA
Three-phase continuous use power: 3.6 KW
Single-phase maximum power: 4 KVA
Single-phase maximum power: 3.2 KW
Fuel: Gasoline
Voltage: 230/400 V
Frequency: 50 Hz
Engine: Honda GX 390 (STAGE V)
Starting: Manual
Consumption: 3.3 Lt/h
Length: 720 mm
Width: 480 mm
Height: 515 mm
Weight: 95 Kg
The GENSET MPM 5-200 I-EL-H electrode motorwelder has a 5 KVA singlephase threephase Stage V gasoline engine with manual start, equipped with a trolley for easy transport.
Thanks to its compact size and very low weight, the GENSET is a lightweight and easy to transport motor welder.
The GENSET MPM 5-200 I-EL-H also has a low fuel consumption: only 2.2 Lt/h at 75% load.
The GENSET engine driven welder, thanks to the high quality and efficiency of its components, is suitable for welding DC electrodes with a maximum diameter of 4 mm.
MOTOR WELDING MACHINE WITH CONTINUOUS CURRENT 225A
WITH ALTERNATE CURRENT THREEPHASE AND SINGLEPHASE GENERATOR
AUXILIARY POWER AVAILABLE
BENZINE ENGINE 3000 RPM
Welding method: Electrode
Automatic stop for low oil level
Life-saving differential switch
Protections for power outputs
1 three-hase outlet CEE 400V - 16A
1 singlephase outlet CEE 230V - 16A
Voltmeter
Lwa 98 (73 dB at 7 mt)
Current adjustment: electromechanical
Intermittance at 35%: 225A - 29V
Intermittance at 40%: 225A - 22V
Intermittance at 60%: 170A - 27V
Electronic regulation (DC mode): 40A - 225A
Trigger voltage: 90V
Maximum electrode diameter: 5 mm
Ac 50 Hz AC alternator
Type: asynchronous, self-excited and self-protected
Threephase output (emergency): 5kVA - 400V
Threephase output (continuous): 4.5kVA - 400V
Singlephase output (maximum): 4kVA - 230V
Factor cos ф 0.8
Petrol engine 3000 rpm
Honda GX390 - 1 cil. - STAGE V - 390 cm3
Maximum power: 11,5 hp (8,7 kWm)
Start: manual
Cooling: air
Fuel tank capacity: 6,1 lt
Fuel consumption at 75% load: 3.3 lt/h
Isolation class: H
Ambient temperature: 40 °C (*)
Reference altitude: 1000 m (*)
Protection class: IP 23
Dimensions (L x W x H): 720 x 480 x 515 mm
Dry weight: 95 kg
In addition to the MOTOSALDATRICE GENSET MPM 5-200 I-EL-H on our site is available the whole range genset viewable by clicking here
Images MOTOSALDATRICE GENSET MPM 5-200 I-EL-H 5KVA and technical data are not binding.