GENSET MPM 6/230 KI - ENGINE DRIVEN WELDER 6 KVA INVERTER

Brand: GENSET

Reference: MPM 6/230 KI

Condition: New product

OUT OF PRODUCTION

Maximum single-phase power: 6 KVA
Maximum power single-phase: 6 KW
Fuel: Diesel
Voltage: 230/400 V
Frequency: 50 Hz
Engine: Kubota Z482 (STAGE V)
Starting: Electric
Consumption: 1.7 Lt/h
Length: 950 mm
Width: 650 mm
Height: 660 mm
Weight: 214 Kg
Super silent
Inverter

Technical features

Phase: Single phase / Three phase
Maximum power single phase (KW): 6
Maximum power single phase (KVA): 6
Fuel: Diesel
Frequency (Hz): 50
Voltage (V): 230 / 400
Sockets configuration: 2 x 230V 16A CEE
Engine: KUBOTA Z482
Emissions Regulations: Stage 5
Starting system: Electric
Engine capacity (cm³): 479
Number cylinders: 2
Cooling: Water
Alternator: Synchronous
Protection degree: IP23
Motor insulation class: H
Regulation current (A): 20 - 240
Open circuit voltage (V): 90
Maximum diameter electrodes (mm): 6
Intermittence: 240 A al 35% / 180 A al 60%
Fuel tank capacity (L): 24
Consumption (L/h): 1.7
Running time (h): 14.12
Acoustic power: 93 dB(A)
Acoustic pressure: 68 dB(A) at 7 m
Length (mm): 950
Width (mm): 650
Height (mm): 660
Dry weight (Kg): 214
Silenced: Yes
Super silenced: Yes
Product type: Engine driven welder
Voltage regulator: Inverter
Engine manufacturer: Kubota

Details

MOTOR WELDING WITH ELECTRODE DC GENSET MPM 6-230KI THREEPHASE SINGLEPHASE 6 KVA INVERTER

GENSET MPM 6-230KI electrode and TIG motorwelder with 6 KVA singlephase STAGE V variable speed diesel engine with electric start and with Inverter voltage regulator.
Thanks to its compact size and very low weight, the GENSET MPM 6-230KI motorwelder is light and easy to transport.
The GENSET MPM 6-230KI also has a low fuel consumption: only 1.7 Lt/h at 75% of the load.
The GENSET MPM 6-230KI motorwelder, thanks to the high quality and efficiency of its components, is suitable for welding DC electrodes with a maximum diameter of 6 mm.

Main advantages of the GENSET MPM 6-230KI motorwelder

CONTINUOUS CURRENT MOTOR WELDING 240A
WITH SINGLEPHASE ALTERNATED CURRENT GENERATOR
Silenced version
VARIABLE RPM STAGE V DIESEL ENGINE

Technical characteristics of the GENSET

Welding method: Electrode / Tig
Forced arc selector
Remote control socket
Fuel reserve indicator
Battery 12V built-in
Thermal protection
2 singlephase sockets CEE 230V - 16A
Engine oil extraction hose
Central lifting hook
Logic with digital display for reading the following parameters:
generator voltage, battery voltage, frequency, hour meter,
oil pressure, engine temperature, failure to start;
complete with automatic engine stop device with
alarm indication on the display in case of:
-low oil pressure
-high water temperature
- over/under alternator voltage
- over/under alternator frequency
Noise level: Lwa 93 (68 dB at 7 mt)
Welding current adjustment: electronic
Intermittance at 35%: 240A
Intermittance at 60%: 180A
Continuous adjustment: 20A - 240A
Trigger voltage: 90V
Maximum electrode diameter: 6 mm
Type: synchronous, permanent magnets (PMG)
Single-phase power (maximum): 6kVA - 230V
Power factor: cos ф 1
Kubota Z482 Diesel engine - STAGE V - 2 cyl. - 479 cm3
Maximum power: 10.2 HP (7.5 kWm)
Boosting: electric (12Vdc)
Cooling: water
Fuel consumption at 75% load: 1.7 lt/h
Isolation class: H
Environmental temperature: 40 °C (*)
Reference altitude: 1000 m (*)
Protection class: IP 23
Fuel tank capacity: 24 lt
Dimensions (L x W x H): 950 x 650 x 660 mm
Dry weight: 214 kg

Discover our wide range of motorwelding machines click here!
Images and technical data are not binding.