GENSET WELDBABY 180i - ENGINE DRIVEN WELDER 1 KVA INVERTER
Welding method: Electrode
Automatic stop for low oil level
Acoustic power Lwa 98 (73 dB at 7 mt)
DC welding
Intermittance at 60%: 165 A - 24 V
Current adjustment: 40 A - 165 A
Trigger voltage: 70 V
Maximum electrode diameter: 4 mm
Synchronous 50 Hz AC generator, permanent magnets (PMG)
Single-phase power: 1 kVA - 230 V AC
Single-phase power: 0.5 kVA - 110 V AC
Power factor: cos ф 1
Petrol engine 4000 rpm
Type: Honda GX 200 OHV - STAGE V - 1 cyl. - 7,2 HP (5,3 kWm) - 196 cm3
Cooling: air
Start: pull-wire
Fuel tank capacity: 3,8 lt
Fuel consumption at 75% load: 1,8 lt/h
Isolation class: H
Protection class: IP 23
Dimensions (L x W x H): 510 x 440 x 460 mm
Dry weight: 35 kg
- Phase
- Single phase
- Maximum power single phase (KW)
- 1
- Maximum power single phase (KVA)
- 1
- Fuel
- Gasoline
- Frequency (Hz)
- 50
- Voltage (V)
- 110 / 230
- Sockets configuration
- 1 x 230V 16A CEE - 1 x 110V 16A CEE
- Engine
- Honda GX200, 4 stroke, OHV
- Emissions Regulations
- Stage 5
- Engine rpm (rpm)
- 4000
- Ignition
- Recoil
- Starting system
- Pull starter
- Engine capacity (cm³)
- 196
- Number cylinders
- 1
- Cooling
- Air
- Alternator
- Synchronous
- Protection degree
- IP23
- Motor insulation class
- H
- Regulation current (A)
- 40 - 165
- Open circuit voltage (V)
- 70
- Maximum diameter electrodes (mm)
- 4
- Intermittence
- 165 A al 60%
- Fuel tank capacity (L)
- 3.8
- Consumption (L/h)
- 1.8
- Running time (h)
- 2.11
- Acoustic power
- 98 dB(A)
- Acoustic pressure
- 73 dB(A) at 7 m
- Length (mm)
- 510
- Width (mm)
- 440
- Height (mm)
- 460
- Dry weight (Kg)
- 35
- Silenced
- No
- Super silenced
- No
- Product type
- Engine driven welder
- Voltage regulator
- Inverter
- Engine manufacturer
- Honda
GENSET WELDBABY 180I MOTORWELDING FROM 1 KVA INVERTER ENGINE HONDA STAGE V
GENSET WELDBABY 180i electrode welding machine with Honda gasoline engine of 4000 rpm stage V single-phase 1 KVA with manual start and with Inverter voltage regulator.
Thanks to its compact size and very low weight, the GENSET WELDBABY 180i is a lightweight and easy-to-transport motor welder.
The GENSET also has a low fuel consumption: only 1.8 Lt/h at 75% load.
Thanks to the high quality and efficiency of its components, this motor welder is suitable for welding DC electrodes with a maximum diameter of 4 mm.
The GENSET WELDBABY 180i has a low fuel consumption of only 1.8 Lt/h at 75% load.
WELDING MACHINE WITH INVERTER
CONTINUOUS CURRENT OF 165 A
WITH SINGLE-PHASE ALTERNATED CURRENT GENERATOR
BENZINE ENGINE 4000 RPM/MIN STAGE V
Technical characteristics of the GENSET WELDBABY 180i motor welder
Welding method: Electrode
Automatic stop for low oil level
1 single-phase CEE 16 A 110 V AC outlet
1 single-phase CEE 16 A 230 V AC outlet
Thermal protection
Automatic return to idle speed in the absence of load
Acoustic power Lwa 98 (73 dB at 7 mt)
DC welding
Intermittance at 60%: 165 A - 24 V
Current adjustment: 40 A - 165 A
Trigger voltage: 70 V
Maximum electrode diameter: 4 mm
Synchronous 50 Hz AC generator, permanent magnets (PMG)
Single-phase power: 1 kVA - 230 V AC
Single-phase power: 0.5 kVA - 110 V AC
Power factor: cos ф 1
Petrol engine 4000 rpm
Type: Honda GX 200 OHV - STAGE V - 1 cyl. - 7,2 HP (5,3 kWm) - 196 cm3
Cooling: air
Start: pull-wire
Fuel tank capacity: 3,8 lt
Fuel consumption at 75% load: 1,8 lt/h
Isolation class: H
Environmental temperature: 40 °C (*)
Reference altitude: 1000 mt (*)
Protection class: IP 23
Dimensions (L x W x H): 510 x 440 x 460 mm
Dry weight: 35 kg
For more information on this and similar products please feel free to contact us.
Images and technical data not binding.
GROUNDING KIT 10 METRES
GROUNDING KIT 25 METRES
GROUNDING KIT 35 METRES
- Phase
- Single phase
- Maximum power single phase (KW)
- 1
- Maximum power single phase (KVA)
- 1
- Fuel
- Gasoline
- Frequency (Hz)
- 50
- Voltage (V)
- 110 / 230
- Sockets configuration
- 1 x 230V 16A CEE - 1 x 110V 16A CEE
- Engine
- Honda GX200, 4 stroke, OHV
- Emissions Regulations
- Stage 5
- Engine rpm (rpm)
- 4000
- Ignition
- Recoil
- Starting system
- Pull starter
- Engine capacity (cm³)
- 196
- Number cylinders
- 1
- Cooling
- Air
- Alternator
- Synchronous
- Protection degree
- IP23
- Motor insulation class
- H
- Regulation current (A)
- 40 - 165
- Open circuit voltage (V)
- 70
- Maximum diameter electrodes (mm)
- 4
- Intermittence
- 165 A al 60%
- Fuel tank capacity (L)
- 3.8
- Consumption (L/h)
- 1.8
- Running time (h)
- 2.11
- Acoustic power
- 98 dB(A)
- Acoustic pressure
- 73 dB(A) at 7 m
- Length (mm)
- 510
- Width (mm)
- 440
- Height (mm)
- 460
- Dry weight (Kg)
- 35
- Silenced
- No
- Super silenced
- No
- Product type
- Engine driven welder
- Voltage regulator
- Inverter
- Engine manufacturer
- Honda