HELVI GALILEO 219 HF Welding Machine

HELVI GALILEO219HF WELDING MACHINE

HELVI GALILEO219HF is a single-phase inverter welding machine designed to meet the needs of the most demanding users.
The HELVI is easy to use for both electrode welding and TIG welding with HF ignition.
The HELVI GALILEO219HF welder allows pre-setting of all typical parameters of a TIG welding cycle such as: 2T, 4T mode, pre-gas, upslope, pulse frequency, base current, downslope, crater filler current, and post-gas, as well as for electrode welding: Hot Start and Arc Force.

The HELVI GALILEO219HF is equipped with a digital ammeter for viewing the welding current and pre-setting all parameters. It features a simplified front panel with selection options: 2/4T, TIG Slope Down, MMA Arc Force.

HELVI GALILEO219HF is a single-phase welding machine powered at 230 V with a frequency of 50/60 Hz. It delivers a rated power at 60% of 5200 W (MMA) and 4200 W (TIG), with a maximum current of 170 A (MMA) and 200 A (TIG).

HELVI GALILEO219HF welding machine is designed for MMA and TIG welding with electrode diameters ranging from 1.6 mm to 4 mm (MMA).

The open-circuit voltage of the HELVI GALILEO219HF is 64 V, and it has current regulation from 10 A to 170 A (MMA) and from 10 A to 200 A (TIG).

The HELVI GALILEO219HF welding machine has H-class insulation and IP23S protection rating.

HELVI GALILEO219HF welding machine is highly compact and extremely lightweight with a weight of approximately 7 kg, and it is easy to carry thanks to its handle.

Technical specifications of HELVI GALILEO219HF:

Phase type: Single-phase

Frequency: 50/60 Hz

Voltage: 230 V

Power: 5300 W (MMA) / 4200 W (TIG)

Open-circuit voltage: 64 V

Current regulation: 10 - 170 A (MMA) / 10 - 200 A (TIG)

Duty cycle at 40°: 170 A at 25% - 110 A at 60% - 85 A at 100% (MMA) / 200 A at 25% - 130 A at 60% - 100 A at 100% (TIG)

Maximum current: 170 A (MMA) / 200 A (TIG)

Electrode diameter: 1.6 - 4 mm (MMA)

Electrode type: 6013 - 7018 (MMA)

Insulation: H

Protection rating: IP23S

Length: 400 mm

Width: 140 mm

Height: 245 mm

Weight: 7.7 Kg

HELVI GALILEO219HF

If you're looking for another product similar to the HELVI GALILEO219HF welder, we recommend exploring the full range of welders.

Images and technical data are not binding. Always refer to the technical datasheet provided by the manufacturer. Manel Service assumes no responsibility for any changes made by the manufacturer.