TELWIN TECHNOMIG 180 DUAL SYNERGIC EURO 230V
Phase: Single phase
Frequency: 50/60 Hz
Voltage: 230 V
Type of welding: MIG-MAG/FLUX/BRAZING
No-load voltage: 60 V
Regulation current: 20 - 170 A
Current max: 140 A
Steel welding wire diameter: 0.6 - 0.8 mm
Inox welding wire diameter: 0.8 mm
Aluminium welding wire diameter: 0.8 - 1 mm
Flux cored welding wire diameter: 0.8 - 1.2 mm
Brazing wire diameter: 0.8 mm
Length: 460 mm
Width: 240 mm
Height: 360 mm
Weight: 12.1 Kg
- Phase
- Single phase
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 230
- Efficiency (%)
- 86
- Protection degree
- IP23
- No-load voltage (V)
- 60
- Regulation current (A)
- 20 - 170
- Ø steel welding wire (mm)
- 0.6 - 0.8
- Ø inox welding wire (mm)
- 0.8
- Ø aluminium welding wire (mm)
- 0.8 - 1
- Ø flux cored welding wire (mm)
- 0.8 - 1.2
- Ø brazing wire (mm)
- 0.8
- Type of welding
- MIG-MAG
- MIG-MAG welding
- MIG-MAG/FLUX/BRAZING
- Current max (A)
- 140
- Length (mm)
- 460
- Width (mm)
- 240
- Height (mm)
- 360
- Voltage regulator
- Inverter
- Weight (Kg)
- 12.1
Microprocessor controlled MIG-MAG/FLUX/BRAZING inverter wire welding machine.
Technomig is confirmed as the perfect solution for a wide range of applications, from maintenance to installation and interventions in body shops, because of its flexibility and the different materials it can weld (steel, stainless steel, aluminium), or braze weld (galvanized sheet).
The fast SYNERGIC adjustment of the welding parameters thanks to the "ONE TOUCH" technology, makes the product very easy to use.
Just set the material thickness and start welding: the intelligent and automatic control of the arc, moment by moment, maintains high welding performance in all working conditions, with different materials and/or gases.
The operator can also intervene manually along the arc length: this adjustment means the weld seam can be modified according to the welder's style.
Lightweight and very compact, Technomig can be moved around easily in all intervention areas, both indoors and outdoors.
Characteristics:
- Polarity change for GAS MIG-MAG/BRAZING welding
- Synergic adjustment with setting only of the material thickness
- Fine adjustment of the arc length
- 10 synergy curves available
- Compact and light
- Thermostatic, overvoltage, undervoltage, overcurrent,motorgenerator (+/- 15%) protections
Fit for NO GAS/Flux welding, it can be transformed into MIG-MAG with the optional kit.
Complete with MIG-MAG torch, work clamp and cable.
Not binding images and technical data.
- Phase
- Single phase
- Frequency (Hz)
- 50 / 60
- Voltage (V)
- 230
- Efficiency (%)
- 86
- Protection degree
- IP23
- No-load voltage (V)
- 60
- Regulation current (A)
- 20 - 170
- Ø steel welding wire (mm)
- 0.6 - 0.8
- Ø inox welding wire (mm)
- 0.8
- Ø aluminium welding wire (mm)
- 0.8 - 1
- Ø flux cored welding wire (mm)
- 0.8 - 1.2
- Ø brazing wire (mm)
- 0.8
- Type of welding
- MIG-MAG
- MIG-MAG welding
- MIG-MAG/FLUX/BRAZING
- Current max (A)
- 140
- Length (mm)
- 460
- Width (mm)
- 240
- Height (mm)
- 360
- Voltage regulator
- Inverter
- Weight (Kg)
- 12.1